INFORMATION


    M12 CONNECTOR FOR REPLENISHMENT AND TEMPORARY CONNECTION 200A
    GAMME
    Connectors and Sockets
    TYPE
    M12 screw connection
    REFERENCE
    TW2418
    DESCRIPTION
    M12 screw-on connector with direct connection. * 1 entry for aluminium or rigid copper cable housing up to 95 mm². * 2 6 mm Allen screws for tightening the cable in the connectors * 1 rubber protection at the input of the connection to protect access to the power * 1 retractable sleeve to provide IP2X protection in connected mode. * 1 captive black protective cap.
    UTILISATION
    * Use in the case of needing an M12 connection from a cable that is not equipped with a connection (bare cable) * Use in extreme cases requiring a fast connection using aluminium or copper grid cable found on the grid. * Carry out quick connections from the bare cable already present on the building site. * 1 x 6mm hex key type tool is enough for this type of connector to ensure a temporary power connection.
    INTENSITE ADMISSIBLE :
    200 A
    TENSION NOMINAL :
    1000 V AC and 1500V DC
    TYPE DE CABLE :
    H07RN-F (with socket only) / U1000R2V
    SECTION DU CABLE :
    16 mm² to 95 mm²
    MATIERES :
    * Copper connection + silver coating for perfect contact * Insulation: high performance polycarbonate