ISOLATED CLAMP M12 – 400A
For M12 screw connection M12
* Short-side clamping clamp with 2 female outputs (M12) with IP2X protection for CV400 screw-type connectors. * Head having a contact surface and a piston. * A tightening handle equipped with a built-in 18 Nm torque limiter * Equipped with a 4 mm female socket allowing for connection of any type of measuring device (or VAT) equipped with cables with a 4 mm male banana plug.
* The LV board clamps with screw-on connector jacks are intended to be set up on the bars of a LV board. They enable the electrical connection between this board and one or two screw-on connectors subject to the FT LV 823, in order to connect a generator, a mobile transformer or any other electrical work. * No connection-disconnection should be performed under load. * Allows for switching between 2 contiguous starts on the LV board to connect to the bus-bar.
INTENSITE ADMISSIBLE :
TENSION NOMINAL :
1000 V AC and 1500V DC
Length of the clamp: 525 mm
* Aluminium connection * Insulation: Semi-hard polyvinyl chloride