INFORMATION


    CONNECTOR ISOLATED ELBOW M12/M8 – 250A
    GAMME
    Connectors and Sockets
    TYPE
    M12 screw connection
    REFERENCE
    TW2421
    DESCRIPTION
    * M12 screw-type connector CV250 intended to be connected to the end of a unipolar shunt equipped with a male M8 socket. * Contains a silver-coated contact surface to ensure optimum contact resistance and reduce overheating related to the transfer of intensity. * Equipped with an M12 clamping screw using an isolated key (6mm hex) fitted with a 18 Nm torque limiter (isolated male key ref TWMS84LC18) which enables the contact surface of the connector to be connected to screw on the contact surface of the reception part. * Connector equipped with a system preventing unintentional loosening of the connector. * Captive black protective cap.
    UTILISATION
    * Allows for the use of the entire range of M12 accessories from shunts fitted with male M8 screw-on connectors (TW2410) * Turns your shunts equipped with M8 ends into shunts equipped with a standard M12 screw-on connector CV250. * Used to ensure interfacing between Low Voltage board with M12 screw-on connector.
    INTENSITE ADMISSIBLE :
    250 A
    TENSION NOMINAL :
    1000 V AC and 1500V DC
    TYPE DE CABLE :
    HO7RN-F
    MATIERES :
    * Copper connection + silver coating for perfect contact * Insulation: high performance polycarbonate