• * M12 screw-type connector CV250 intended to be connected to the end of a unipolar shunt equipped with a male M8 socket. * Contains a silver-coated contact surface to ensure optimum contact resistance and reduce overheating related to the transfer of intensity. * Equipped with an M12 clamping screw using an isolated key (6mm hex) fitted with a 18 Nm torque limiter (isolated male key ref TWMS84LC18) which enables the contact surface of the connector to be connected to screw on the contact surface of the reception part. * Connector equipped with a system preventing unintentional loosening of the connector. * Captive black protective cap.
  • M12 screw-on connector with direct connection. * 1 entry for aluminium or rigid copper cable housing up to 95 mm². * 2 6 mm Allen screws for tightening the cable in the connectors * 1 rubber protection at the input of the connection to protect access to the power * 1 retractable sleeve to provide IP2X protection in connected mode. * 1 captive black protective cap.
  • * Internal receiving socket sized to receive the end of the crimping cable (HO7RN-F type unipolar flexible cable by default) * Contains a contact surface with silver coating to ensure optimum contact resistance and reduce the temperature rise linked to the transit of intensity. * Equipped with an M12 clamping screw using an isolated key (6mm hex) fitted with a 18 Nm torque limiter (isolated male key ref TWMS84LC18) which enables the contact surface of the connector to be connected to screw on the contact surface of the reception part. * Connector equipped with a system preventing unintentional loosening of the connector. Protection cap