• * BJV4 400 / M12 * 4 electrically connected socket outlets for M12 screw-on connectors * IP2X protection shutter * Shutter lockable with padlock.
  • * ADAPTOR with M16 threaded 1-end socket type connector with 16 diameter hole for attachment to docking surface.
  • * Box with M12 output for M12 screw-on connector * 1 Input for connection to grounding spike diam 26 mm maxi
  • * Pre-insulated bypass connector for LV overhead grid in twisted insulated conductors with separate clamping. Type CDR / CT 2S-150-70. * Connection to the main conductor with 1 screw fuse.
  • * Pre-insulated bypass connector for LV overhead grid in twisted insulated conductors with separate clamping. Type CDR / CT 2S-70-70. * Connection to the main conductor with 1 screw fuse.
  • * Pre-insulated bypass connector for LV overhead grid in twisted insulated conductors with separate clamping. Type CDR / CT 2S-150-150. * Connection to the main conductor with 1 screw fuse.
  • * BMCI / SC-E * Semi-conductive knives for elastic fuse holders with centre distance 160 mm (size 2) * An M12 thread for CV110 / CV250 or CV400 type screw-on connectors and electrically connected to the conductor blade.
  • * BMCI / EC-E * Fully conductive knives for fuse holder with elastic clamping centre distance 115 mm. (Size 2) * An M12 thread for type CV110 / CV250 or CV400 screw connection and electrically connected to the 2 conductive blades. * Conductive strip on both sides.
  • * BMCI / EC-E * Fully conductive knives for fuse holder with elastic clamping centre distance 160 mm. (size 2) * An M12 thread for type CV110 / CV250 or CV400 screw connection and electrically connected to the 2 conductive blades. * Conductive blade on both sides.
  • * Fuse size 22x58 * 1 small cable equipped with a reception connection for bare rigid cable cross-sections 10 to 35mm²
  • * Fuse size 22x58 * 1 small cable equipped with a reception connection for bare rigid cable cross-cross-section 10 to 35 mm² * 1 fuse holder type 22x58
  • * Fuse size NH00 * 1 small cable equipped with a reception connection for bare rigid cable of cross-cross-section 10 to 35mm²
  • * Fuse size NH00 * 1 small cable equipped with a reception connection for bare rigid cable cross-cross-section 10 to 35mm² * 1 fuse holder type 22 x 58
  • * 1 Clamp for tightening on hexagonal 17 and 19 mm. * 1 sheath on slide to optimise protection and access to power after connection. * 1 x 4 mm socket for banana plug integrated into the clamping handle for connection of a measuring device (or VAT) * 1 x M8 female connection for connecting shunt cables equipped with male M8 connectors.
  • * Short-side clamping clamp with 2 female outputs (M12) with IP2X protection for CV400 screw-type connectors. * Head having a contact surface and a piston. * A tightening handle equipped with a built-in 18 Nm torque limiter * Equipped with a 4 mm female socket allowing for connection of any type of measuring device (or VAT) equipped with cables with a 4 mm male banana plug.
  • * Short-side clamping clamp with 2 female outputs (M12) with IP2X protection for CV110 / CV250 or CV400 screw-type connectors. * Head having a contact surface and a piston. * A clamping handle equipped with a built-in 18 Nm torque limiter * Equipped with a 4 mm female socket allowing for connection of any type of measuring device (or VAT) equipped with cords with a 4 mm male banana plug.
  • * Short-side clamping clamp with 2 female outputs (M12) with IP2X protection for CV400 screw-type connectors. * Head having a contact surface and a piston. * A tightening handle equipped with a built-in 18 Nm torque limiter * Equipped with a 4 mm female socket allowing for connection of any type of measuring device (or VAT) equipped with cables with a 4 mm male banana plug.
  • * Flat bar locking clamp long version equipped with 1 female output (M16) for screw-on connectors type CV800. * Head having a contact surface and a piston. * A tightening handle equipped with a built-in 18 Nm torque limiter * Equipped with a 4 mm female socket allowing for connection of any type of measuring device (or VAT) equipped with cables with a 4 mm male banana plug.
  • * Short-side clamping clamp with 2 female outputs (M12) with IP2X protection for CV400 screw-type connectors. * Head having a contact surface and a piston. * A tightening handle equipped with a built-in 18 Nm torque limiter * Equipped with a 4 mm female socket allowing for connection of any type of measuring device (or VAT) equipped with cables with a 4 mm male banana plug.