• * ADAPTOR with M16 threaded 1-end socket type connector with 16 diameter hole for attachment to docking surface.
  • * ADAPTOR with one M16 threaded entry and one M12 male end.
  • * ADAPTOR with 1 M8 FEMALE end on one side and 1 M12 FEMALE end (compatible CV110 / CV250 / CV400) on the other. * 1 keyhole for 6 mm hex key to allow for clamping of the adaptor on the connectors.
  • * ADAPTOR with 1 M8 male end on one side and 1 M12 FEMALE end (compatible CV110 / CV250 / CV400) on the other. * 1 keyhole for 6 mm hex key to allow for clamping of the adaptor on the connectors.
  • * ADAPTOR with 1 M12 FEMALE end on one side and 1 end of type terminal with Diam hole 13 MM.
  • * Adaptor with 1 M12 FEMALE end on one side and 1 fork terminal 12 mm end on the other
  • * Adaptor with 1 M12 FEMALE end on one side and 1 end fork terminal diam 18mm on the other
  • * Adaptor with 1 M12 threaded entry (for screw connection for example) and 1 flat bar type of reception at the other extremity
  • * Adaptor with 1 M12 FEMALE end on one side and 1 end of type terminal with 15 MM diam hole on the other.
  • *Adaptor with 2 M12 threaded ends for M12 screw connectors * 1 hole for 6 mm hex key for blocking the adaptor upon connection
  • * Adaptor with 1 M12 female end to receive screw connector on one side and a connector of cylindrical type same diameter 10 on the other (for connection on Aerial connector type K341 / K342 for example)
  • * 1 female M12 end to receive screw connector on one side and a cylindrical connector type male 15.5 mm diam. on the other (for connection on aerial adaptor type K343 for example)
  • * Short-side clamping clamp with 2 female outputs (M12) with IP2X protection for CV110 / CV250 or CV400 screw-type connectors. * Head having a contact surface and a piston. * A clamping handle equipped with a built-in 18 Nm torque limiter * Equipped with a 4 mm female socket allowing for connection of any type of measuring device (or VAT) equipped with cords with a 4 mm male banana plug.
  • * Short-side clamping clamp with 2 female outputs (M12) with IP2X protection for CV400 screw-type connectors. * Head having a contact surface and a piston. * A tightening handle equipped with a built-in 18 Nm torque limiter * Equipped with a 4 mm female socket allowing for connection of any type of measuring device (or VAT) equipped with cables with a 4 mm male banana plug.
  • * Short-side clamping clamp with 2 female outputs (M12) with IP2X protection for CV400 screw-type connectors. * Head having a contact surface and a piston. * A tightening handle equipped with a built-in 18 Nm torque limiter * Equipped with a 4 mm female socket allowing for connection of any type of measuring device (or VAT) equipped with cables with a 4 mm male banana plug.
  • * Short-side clamping clamp with 2 female outputs (M12) with IP2X protection for CV400 screw-type connectors. * Head having a contact surface and a piston. * A tightening handle equipped with a built-in 18 Nm torque limiter * Equipped with a 4 mm female socket allowing for connection of any type of measuring device (or VAT) equipped with cables with a 4 mm male banana plug.
  • * 1 Clamp for tightening on hexagonal 17 and 19 mm. * 1 sheath on slide to optimise protection and access to power after connection. * 1 x 4 mm socket for banana plug integrated into the clamping handle for connection of a measuring device (or VAT) * 1 x M8 female connection for connecting shunt cables equipped with male M8 connectors.
  • * Pin with opening max. 25 mm for clamping on flat bar * 1 x IP2X sleeve with spring return that does not require any intervention on the part of the user to protect the connection after connection. * 1 x mm socket for banana plug integrated in the clamping handle for connection of a measuring device (or VAT) * 1 x M8 female connection for connection of shunt cables equipped with male M8 socket.
  • * 1 end clamp for 8 to 12 mm or 8 to 12 mm square bar. * 1 sheath on slide to optimise protection and access to power. * 1 x 4 mm socket for banana plug integrated into the clamping handle for connection of a measuring device (or VAT) * 1 x M8 female connection for connecting shunt cables equipped with male M8 connectors.
  • * Pin with opening max. 25 mm for clamping on flat bar * 1 x IP2X sleeve with spring return that does not require any intervention on the part of the user to protect the connection after connection. * 1 x 4 mm socket for banana plug integrated into the clamping handle for connection of a measuring device (or VAT for example) * 1 x M8 female connection for connecting shunt cables equipped with male M8 connectors.